Exactly how loud is a Paramotor with David Wolfe
Have you ever wondered how loud a paramotor is? Is it louder than a train? Is it louder than a vacuum cleaner? Is it louder…
Category: General
General Posts
How to Replace the Carter Engine Support on a Moster 185
Either you just want to do some maintenance on the engine, or it broke after a prop strike, replacing the engine carter support is not…
A review of the Ozone Sirocco 3 with AJ Goin
The Speedster 3 and the Sirocco 3 are the same design and essentially the same wing. The differences lie in the color profile and the…
First Impressions of the Sirocco 3 with Judson Graham
Check out the video above for a non-biased first impressions video of the Ozone Sirocco 3 Wing. The Ozone Sirocco is an intermediate glider and…
How to Clean your Decompression Port on the Moster 185 with Vittorazi
If your Moster is getting harder to pull-start, and it seems to be harder to crank it over, then have a look at the decompression…
A Review of the Ozone Speedster 3 with Tucker Gott
In this video, Tucker dives into the relatively new Ozone Speedster 3. A lot of people have been asking for his thoughts on this wing.…
How to use your Speed Bar with AJ Goin
A speed bar can be the difference between making it back to your LZ, or landing out. If you fly in stronger winds, you’ll probably…
Vittorazi Moster185 Piston Swap with SCOUT
Although not a complicated operation, it requires a few tools and some mechanical skills. Nothing that you can’t do at home with the engine installed…
Why Ground Handling is so Important
So, this guy at the hill did not have a great day… I would explain what happens, but it’s better if you just watch the…
How to Build a Propeller Mold with Kyle O’Glee
Propeller repair and balance is part of running a fleet of paramotors used for training. This is one example of a mold Kyle made, and…